How To Use The Fischer: Underarms
The Fischer: Underarms is a modern, metal-free iontophoresis device. Silicone-graphite electrodes with soft sponge pad inserts deliver a better, faster, and safer experience for axillary hyperhidrosis patients.
Soft-touch and designed to contour to your underarms, these state-of-the-art underarm attachments ensure treatment is delivered consistently across your skin’s surface area.
This how to article reviews setup and treatment:
Soft-touch and designed to contour to your underarms, these state-of-the-art underarm attachments ensure treatment is delivered consistently across your skin’s surface area.
This how to article reviews setup and treatment:
STEP ONE
First, clean your underarms by removing ointments, creams, and/or cosmetics.
STEP TWO
Soak the sponge pad sleeves in tap water, but don’t wring them out! The wetter the better as this helps ensure current flow.
STEP THREE
Take each of the axillary electrodes and insert them into the sponge pad sleeves. Make sure they are completely pushed in.
![Photograph capturing the metal-free silicone underarm attachments designed for RA Fischer's 'The Fischer' Device—an iontophoresis device crafted for hyperhidrosis (excessive sweating) treatment. These attachments consist of small black electrodes encased within white, cloth-like sleeves. They are specifically intended for the treatment of axillary (underarm) hyperhidrosis. [ Iontophoresis Device for Sweating ]](https://www.rafischer.com/wp-content/uploads/2023/09/the-fischer-iontophoresis-machine-hyperhidrosis-sweat-treatment-home-hospital-insurance-fda-approved-ra-fischer-8-scaled.webp)
STEP FOUR
Plug The Fischer control unit into the wall and power it on.
STEP FIVE
Plug the axillary electrode cables into the connectors E1 and E2 located at the back of the control unit.
![Image highlighting the back panel of RA Fischer's 'The Fischer' Device, showcasing the white, rectangular 'main control unit.' This specialized iontophoresis device is specifically designed to address hyperhidrosis (excessive sweating). In the photograph, you can discern the power switch and the electrode ports. The background is solid white. [ Iontophoresis Device for Sweating ]](https://www.rafischer.com/wp-content/uploads/2023/09/the-fischer-iontophoresis-machine-hyperhidrosis-sweat-treatment-home-hospital-insurance-fda-approved-ra-fischer-11-scaled.webp)
STEP SIX
Set treatment timer to 15-20 minutes
STEP SEVEN
Set power level. It’s important to treat at a level that’s comfortable for you. Most patients begin low at 1-3 mA and gradually increase over time.
STEP EIGHT
You’re now ready to begin treatment. Insert an attachment (sponge pad sleeve + electrode) under each arm, with the connector cables pointing to the front. Keep them in place by applying slight pressure with your arms.
STEP NINE
After your treatment timer reaches zero and you hear the beep, remove the attachments from under your arms. Power The Fischer off, because you’re finished!
More information
Find more information about using The Fischer on the "Getting Started With The Fischer Page"
QUESTIONS?
Please refer to The Fischer instruction manual for full details on setup and treatment. Contact our Treatment Specialists with additional questions!
THE FISCHER
Reach out today
Contact one of our Treatment Specialists today to answer any and all of your questions about the Fischer.
Leave a Reply
You must be logged in to post a comment.